YSE Series Solid Rotor Soft Start Motor (R1)
Deskripsi Produk
Motor YSE nduweni karakteristik mekanik sing relatif alus, yaiku, torsi stall gedhe, slip gedhe, lan akselerasi alon.Mulane, crane bisa dilengkapi motor YSE kanggo njupuk efek wiwitan alon, supaya kedadean impact bisa nemen apik nalika crane wiwit.(Bisa ngganti motor rotor tatu, saéngga ngilangi resistor eksternal lan komponen kontrol elektronik kayata pengontrol cam, ngirit biaya, nyuda kegagalan, lan ningkatake keandalan)
Seri motor iki nduweni arus rotor sing dikunci cilik, sing bisa nyukupi kabutuhan crane sing kerep diwiwiti lan jogging.Penggulungan motor ora bakal kobong nganti 6-7 menit sawise motor dikunci.Iki dilengkapi rem AC pesawat, lan torsi rem bisa diatur kanthi sewenang-wenang.Crane mandheg Operasi mandheg alon bisa dipikolehi nalika ora ana impact.
Papat kaluwihan / fitur pinunjul saka seri YSE:
Soft wiwitan Mlaku tanpa impact.
Pasukan wiwitan gedhe bisa terus-terusan sajrone 8 jam.
entheng lan hemat energi 1/4 saiki miwiti hemat energi lan perlindungan lingkungan.
Practicability kuwat Adaptasi kanggo operasi lingkungan suhu dhuwur.
Struktur lan Prinsip
Motor rem wiwitan alus YSE seri (generasi 3) minangka motor rem mundhut daya, lan rem cakram DC dipasang ing tutup mburi ujung ekstensi non sumbu motor.Prinsip kerja yaiku nalika motor disambungake menyang sumber daya, penyearah rem uga disambungake menyang sumber daya amarga daya tarik elektromagnetik.Elektromagnet narik armature lan compresses spring, nyebabake disc brake kanggo copot saka armature lan tutup mburi, nyebabake motor kanggo operate.Nalika daya dipateni, elektromagnet brake ilang daya tarik elektromagnetik, lan pasukan spring nyurung armature kanggo ngompres disk brake.Ing tumindak torsi gesekan, motor langsung mandheg muter.
Motor wiwitan alus generasi pisanan (R1) rotor padhet AC brake-parameter
| Kursi No. | daya | Tegangan | Frekuensi | sistem kerja | Tingkat perlindungan | Isolasitingkat |
| 80~160 | 0,4 ~ 15KW | 380v | 50HZ | S3 40% | IP54 | F |
Parameter teknis seri YSE
| Jinis | daya(D.KW) | Pamblokiran Torsi(DN·M) | Pamblokiransaiki(D·A) | kacepetan Rated(r/min) | Kacepetan sinkron(r/min) | Torsi rem(BK-N·M) | |
| 4-tingkat | 801-4 | 0.4 | 4 | 2.8 | 1200 | 1500 | 1-6 |
| 802-4 | 0.8 | 8 | 3.6 | 1-6 | |||
| 90S-4 | 1.1 | 12 | 6.2 | 1-6 | |||
| 90L-4 | 1.5 | 16 | 7.5 | 2-10 | |||
| 100L1-4 | 2.2 | 24 | 10 | 2-10 | |||
| 100L2-4 | 3 | 30 | 12 | 3-20 | |||
| 112M-4 | 4 | 40 | 17 | 3-30 | |||
| 132S-4 | 5.5 | 52 | 24 | 3-30 | |||
| 132M-4 | 7.5 | 76 | 32 | 10-40 | |||
| 160M-4 | 11 | 116 | 58 | 10-40 | |||
| 160L-4 | 15 | 150 | 75 | 20-50 | |||
| 180M-4 | 18.5 | 185 | 92 | 20-50 | |||
| 180L-4 | 22 | 220 | 110 | 20-60 | |||
| 200L-4 | 30 | 300 | 170 | 20-60 | |||
| 225S-4 | 37 | 370 | 190 | 20-60 | |||
| 225M-4 | 45 | 450 | 248 | 30-80 | |||
| 250-4 | 55 | 550 | 380 | 30-80 | |||
| 280-4 | 75 | 750 | 430 | 75-250 | |||
| 280-4 | 90 | 900 | 510 | 75-250 | |||
| 315-4 | 110 | 1100 | 600 | 150-450 | |||
| 315-4 | 132 | 132 | 780 | 150-450 | |||
| 315-4 | 160 | 1600 | 940 | 150-450 | |||
| 315-4 | 200 | 2000 | 1200 | 150-450 | |||
| 6-tingkat | 80M2-6 | 0.4 | 8 | 4 | 800 | 1000 | 2-10 |
| 90S-6 | 0.8 | 12 | 5 | 2-10 | |||
| 90L-6 | 1.1 | 23 | 8 | 3-20 | |||
| 100L-6 | 1.5 | 33 | 11.5 | 3-20 | |||
| 112M-6 | 2.2 | 46 | 16 | 3-30 | |||
| 132S-6 | 3 | 60 | 19 | 10-40 | |||
| 132M1-6 | 4 | 82 | 25 | 10-40 | |||
| 132M2-6 | 5.5 | 112 | 42.5 | 10-40 | |||
| 160M-6 | 7.5 | 160 | 52 | 20-50 | |||
| 160L-6 | 11 | 235 | 64 | 20-50 | |||
| 180L-6 | 15 | 270 | 88 | 20-60 | |||
| 200L1-6 | 18.5 | 320 | 110 | 30-70 | |||
| 200L2-6 | 22 | 435 | 150 | 30-70 | |||
| 225M-6 | 30 | 540 | 180 | 30-80 | |||
| 250-6 | 37 | 660 | 220 | 30-80 | |||
| 280-6 | 45 | 810 | 270 | 75-250 | |||
| 280-6 | 55 | 990 | 330 | 75-250 | |||
| 315-6 | 75 | 1350 | 450 | 150-450 | |||
| 315-6 | 90 | 1620 | 540 | 150-450 | |||
| 315-6 | 110 | 1980 | 650 | 150-450 | |||
| 315-6 | 132 | 2300 | 795 | 150-450 | |||
| 8-tingkat | 80M-8 | 0.4 | 8 | 3.7 | 600 | 750 | 1-6 |
| 90M-8 | 0.8 | 16 | 6 | 1-6 | |||
| 90L-8 | 1.1 | 22 | 8.5 | 2-10 | |||
| 100M-8 | 1.5 | 32 | 11 | 3-30 | |||
| 112S-8 | 2.2 | 48 | 14.8 | 3-30 | |||
| 132M-8 | 3 | 60 | 18 | 10-40 | |||
| 160M1-8 | 4 | 80 | 23 | 10-40 | |||
| 160M2-8 | 5.5 | 100 | 27 | 20-50 | |||
| 160L-8 | 7.5 | 150 | 36 | 20-50 | |||
| 180L-8 | 11 | 220 | 53 | 20-60 | |||
| 200L-8 | 15 | 300 | 70 | 30-70 | |||
| 225S-8 | 18.5 | 370 | 88 | 30-80 | |||
| 225M-8 | 22 | 450 | 110 | 30-80 | |||
| 250-8 | 30 | 600 | 160 | 75-250 | |||
| 280-8 | 37 | 740 | 200 | 75-250 | |||
| 280-8 | 45 | 900 | 244 | 75-250 | |||
| 315-8 | 55 | 1100 | 300 | 150-450 | |||
| 315-8 | 75 | 1500 | 410 | 150-450 | |||
| 315-8 | 90 | 1800 | 490 | 150-450 | |||
| 315-8 | 110 | 220 | 600 | 150-450 | |||
| 10-tingkat | 90L-10 | 0.4 | 11 | 3.2 | 480 | 600 | 2-10 |
| 100L-10 | 0.8 | 17 | 5.2 | 3-20 | |||
| 112M-10 | 1.5 | 40 | 10.8 | 3-20 | |||
| 132S-10 | 2.2 | 60 | 15 | 10-40 | |||
| 132M-10 | 3 | 80 | 17.5 | 10-40 | |||
| 160M1-10 | 4 | 110 | 22 | 20-50 | |||
| 160M2-10 | 5.5 | 150 | 29 | 20-50 | |||
| 160L-10 | 7.5 | 210 | 40 | 20-50 | |||
| 180M-10 | 11 | 300 | 55 | 20-60 | |||
| 180L-10 | 15 | 410 | 70 | 20-60 | |||
| 200L1-10 | 18.5 | 500 | 92 | 30-70 | |||
| 200L2-10 | 22 | 600 | 110 | 30-70 | |||
| 225M-10 | 30 | 820 | 148 | 30-80 | |||
| 12-tingkat | 90L-12 | 0.4 | 6 | 3.5 | 400 | 500 | 2-10 |
| 100 L-12 | 0.8 | 15 | 4 | 3-20 | |||
| 112M-12 | 1.5 | 37 | 9.6 | 3-20 | |||
| 132M-12 | 3 | 76 | 15.5 | 10-40 | |||
| 160L-12 | 5.5 | 148 | 34.5 | 20-50 | |||
| 180M-12 | 7.5 | 202 | 38 | 20-60 | |||
| 180L-12 | 11 | 285 | 47 | 20-60 | |||
| 200L1-12 | 15 | 376 | 60 | 30-70 | |||
| 225S-12 | 18.5 | 467 | 74 | 30-70 | |||
| 22MS-12 | 22 | 562 | 90 | 30-80 | |||
| 225M-12 | 30 | 760 | 130 | 30-80 | |||
| 16-tingkat | 180M-16 | 3 | 98 | 32 | 300 | 375 | 20-60 |
| 180L-16 | 4 | 116 | 37 | 20-60 | |||
| 200L-16 | 4 | 116 | 37 | 20-60 | |||
| 225S-16 | 7.5 | 260 | 80 | 30-80 | |||
| 225S-16 | 11 | 390 | 110 | 30-80 | |||
